Correct RPM Level will Improve performance

First the best way to improve performance is with the correct propeller. You can try all kinds of different propellers with different types of blades styles and cupping and diameter and weight in the boat and water and wind condition and you will always get a variety of results but the only way to know is by trial and error.Also in the marine industry weight is everything you will loose significant top speed as you add weight to the boat (fuel, passengers and cargo).

WOT (wide open throttle) RPM reading with current prop is the best way to know how we can improve your performance.

Many factors can reduce your RPM in many ways: upgrading to better materiel, increasing the diameter and/or pitch, upgrading to a 4 blade and cupping, just to name a few

The difference between 3 blades over 4 blades is that the 3 blade (smaller blade ratio) usually goes faster and the 4 blade (higher Blade ratio) is better hole shot and better stern lift as well as better handling and fuel economy because it will keep you on plane at a lower speed. If we are talking performance; stainless steel propellers are the best followed by composite propellers and then aluminum. If you are not worried about hitting and damaging the prop; I strongly suggest investing in a Powertech stainless, the performance is an improvement on holeshot top speed and fuel economy. We can sell you some less expensive stainless but I do not recommend.

Your second best alternative is a composite propeller by Piranha. Piranha composite propellers are superior to any aluminum. Piranha propellers were developed with three things in mind: durability, performance and affordability. A key feature is that the blades are replaceable. You can change the diameter and the pitch, save on the costs involved with propeller repairs, not to mention the potential damage to your gear case. With Piranha you can have some spare blades in the boat for a quick and affordable repair. A 3 blade composite prop by Piranha is $147 ready to put on the boat with the hub which is guarantied for life and 3 blades with the diameter and pitch that you need. If you need spare blades they cost only $22 each.

We also sell the hi-grade aluminum which will cost about $20-25 less then the composite
You can call 1-866-621-7767 to place an order

Canada Propeller

Share this Blog :